PyCSW Harvesting.

Next Topic
 
classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

PyCSW Harvesting.

bslunab
Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.

I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.

Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?

Q: I'm currently using Mapserver 7.7.0-dev in windows.

Regards.

Thanks a lot.

_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

Tom Kralidis
Hi Brian: thanks for the info.  Comments interleaved:

On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:
>
> Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>

What kind of installation problems are you having?

> I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>
> Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>

You can run a CSW-T Harvest XML POST request with the following XML request:

https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml

Here, you would replace the <Source> element content with your WMS
base URL.  To invoke XML POST requests, see the following
FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests

Hope this helps.

..Tom

> Q: I'm currently using Mapserver 7.7.0-dev in windows.
>
> Regards.
>
_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

bslunab
Thanks a lot for your response Tom, so I have a question, should I follow this steps to harvest a wms service:

1. Modify the following XML request from my WMS service: https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xmlv (I named: post.xml and save it in c:\geiper\post\post.xml)
2. Set in my default.cfg transactions=true
3. When it's done, I should execute this command line:

python bin/pycsw-admin.py -c post_xml -u http://localhost/pycsw/csw.py -x c:\geiper\post\post.xml

4. Refresh the harvested records with the following command line:

python bin/pycsw-admin.py  -c refresh_harvested_records -f default.cfg
Those were all the steps I must follow to harvest records from WMS?

If yes, I get the following error:

b'<?xml version="1.0" encoding="UTF-8" standalone="no"?>\n<!-- pycsw 2.4.2 -->\n<ows:ExceptionReport xmlns:csw="http://www.opengis.net/cat/csw/2.0.2" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gml="http://www.opengis.net/gml" xmlns:ows="http://www.opengis.net/ows" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2.0" language="en-US" xsi:schemaLocation="http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd"><ows:Exception exceptionCode="NoApplicableCode" locator="service"><ows:ExceptionText>Exception: document not well-formed.\nError: EntityRef: expecting \';\', line 3, column 95 (&lt;string&gt;, line 3).</ows:ExceptionText></ows:Exception></ows:ExceptionReport>'

And My post.xml is formed like this:



  <ResourceType>http://www.opengis.net/wms</ResourceType>
  <ResourceFormat>application/xml</ResourceFormat>
</Harvest>

Thank you so much for your help.




El mar., 13 oct. 2020 a las 19:28, Tom Kralidis (<[hidden email]>) escribió:
Hi Brian: thanks for the info.  Comments interleaved:

On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:
>
> Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>

What kind of installation problems are you having?

> I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>
> Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>

You can run a CSW-T Harvest XML POST request with the following XML request:

https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml

Here, you would replace the <Source> element content with your WMS
base URL.  To invoke XML POST requests, see the following
FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests

Hope this helps.

..Tom

> Q: I'm currently using Mapserver 7.7.0-dev in windows.
>
> Regards.
>

_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

Tom Kralidis
Hi Brian: it looks like the "&" characters in the <Source> element are
causing XML parsing issues.  They are also
not required in the context of a CSW Harvest request.  Can you update
your XML request with just the base URL
in <Source>?  The request parameters are autogenerated by pycsw accordingly:

<?xml version="1.0" encoding="UTF-8"?>
<Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
xmlns:ogc="http://www.opengis.net/ogc"
xmlns:gmd="http://www.isotc211.org/2005/gmd"
xmlns:ows="http://www.opengis.net/ows"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:dct="http://purl.org/dc/terms/"
xmlns:gml="http://www.opengis.net/gml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
service="CSW" version="2.0.2">
  <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
  <ResourceType>http://www.opengis.net/wms</ResourceType>
  <ResourceFormat>application/xml</ResourceFormat>
</Harvest>

Are you able to try again and report back?

Thanks

..Tom

On Tue, Oct 13, 2020 at 10:04 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:

>
> Thanks a lot for your response Tom, so I have a question, should I follow this steps to harvest a wms service:
>
> 1. Modify the following XML request from my WMS service: https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xmlv (I named: post.xml and save it in c:\geiper\post\post.xml)
> 2. Set in my default.cfg transactions=true
> 3. When it's done, I should execute this command line:
>
> python bin/pycsw-admin.py -c post_xml -u http://localhost/pycsw/csw.py -x c:\geiper\post\post.xml
>
> 4. Refresh the harvested records with the following command line:
>
> python bin/pycsw-admin.py  -c refresh_harvested_records -f default.cfg
>
> Those were all the steps I must follow to harvest records from WMS?
>
> If yes, I get the following error:
>
> b'<?xml version="1.0" encoding="UTF-8" standalone="no"?>\n<!-- pycsw 2.4.2 -->\n<ows:ExceptionReport xmlns:csw="http://www.opengis.net/cat/csw/2.0.2" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gml="http://www.opengis.net/gml" xmlns:ows="http://www.opengis.net/ows" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2.0" language="en-US" xsi:schemaLocation="http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd"><ows:Exception exceptionCode="NoApplicableCode" locator="service"><ows:ExceptionText>Exception: document not well-formed.\nError: EntityRef: expecting \';\', line 3, column 95 (&lt;string&gt;, line 3).</ows:ExceptionText></ows:Exception></ows:ExceptionReport>'
>
> And My post.xml is formed like this:
>
> <?xml version="1.0" encoding="UTF-8"?>
> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2" xmlns:ogc="http://www.opengis.net/ogc" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:ows="http://www.opengis.net/ows" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gml="http://www.opengis.net/gml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2 http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd" service="CSW" version="2.0.2">
>
>   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map&SERVICE=WMS&VERSION=1.3.0</Source>
>
>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>   <ResourceFormat>application/xml</ResourceFormat>
> </Harvest>
>
> Thank you so much for your help.
>
>
>
>
>
>
>
> El mar., 13 oct. 2020 a las 19:28, Tom Kralidis (<[hidden email]>) escribió:
>>
>> Hi Brian: thanks for the info.  Comments interleaved:
>>
>> On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
>> <[hidden email]> wrote:
>> >
>> > Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>> >
>>
>> What kind of installation problems are you having?
>>
>> > I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>> >
>> > Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>> >
>>
>> You can run a CSW-T Harvest XML POST request with the following XML request:
>>
>> https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml
>>
>> Here, you would replace the <Source> element content with your WMS
>> base URL.  To invoke XML POST requests, see the following
>> FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests
>>
>> Hope this helps.
>>
>> ..Tom
>>
>> > Q: I'm currently using Mapserver 7.7.0-dev in windows.
>> >
>> > Regards.
>> >
_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

bslunab
Hi Tom, sorry for the late response, I've been really busy, but I have some really good news:

Last week I applied your recommendation, so I fellow this to configure correctly the harvest:

1. Change my file post.xml and now look like this:

<?xml version="1.0" encoding="UTF-8"?>
<Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
xmlns:ogc="http://www.opengis.net/ogc"
xmlns:gmd="http://www.isotc211.org/2005/gmd"
xmlns:ows="http://www.opengis.net/ows"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:dct="http://purl.org/dc/terms/"
xmlns:gml="http://www.opengis.net/gml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
service="CSW" version="2.0.2">
  <Source>http://127.0.0.1/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
  <ResourceType>http://www.opengis.net/wms</ResourceType>
  <ResourceFormat>application/xml</ResourceFormat>
</Harvest>


2. Run the following code: python bin/pycsw-admin.py -c post_xml -u http://127.0.0.1/pycsw/csw.py -x C:/ms4w/DATA/post.xml

- Harvest works, at the end show:
...</csw:HarvestResponse>'
Done

3. Then execute the following: pycsw-admin.py -c load_records -p /path/to/records -f default.cfg -y

4. Prove the csw in QGIS with MetaSearch and here appear my layers, so it works PERFECTLY! Thank you so much for your help.

Now I have a question: Does pyCSW generate an html document with the layers and information in? If not, how can I do this automatically just with the GetCapabilities response?

Regards,


El mié., 14 oct. 2020 a las 5:54, Tom Kralidis (<[hidden email]>) escribió:
Hi Brian: it looks like the "&" characters in the <Source> element are
causing XML parsing issues.  They are also
not required in the context of a CSW Harvest request.  Can you update
your XML request with just the base URL
in <Source>?  The request parameters are autogenerated by pycsw accordingly:

<?xml version="1.0" encoding="UTF-8"?>
<Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
xmlns:ogc="http://www.opengis.net/ogc"
xmlns:gmd="http://www.isotc211.org/2005/gmd"
xmlns:ows="http://www.opengis.net/ows"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:dct="http://purl.org/dc/terms/"
xmlns:gml="http://www.opengis.net/gml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
service="CSW" version="2.0.2">
  <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
  <ResourceType>http://www.opengis.net/wms</ResourceType>
  <ResourceFormat>application/xml</ResourceFormat>
</Harvest>

Are you able to try again and report back?

Thanks

..Tom

On Tue, Oct 13, 2020 at 10:04 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:
>
> Thanks a lot for your response Tom, so I have a question, should I follow this steps to harvest a wms service:
>
> 1. Modify the following XML request from my WMS service: https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xmlv (I named: post.xml and save it in c:\geiper\post\post.xml)
> 2. Set in my default.cfg transactions=true
> 3. When it's done, I should execute this command line:
>
> python bin/pycsw-admin.py -c post_xml -u http://localhost/pycsw/csw.py -x c:\geiper\post\post.xml
>
> 4. Refresh the harvested records with the following command line:
>
> python bin/pycsw-admin.py  -c refresh_harvested_records -f default.cfg
>
> Those were all the steps I must follow to harvest records from WMS?
>
> If yes, I get the following error:
>
> b'<?xml version="1.0" encoding="UTF-8" standalone="no"?>\n<!-- pycsw 2.4.2 -->\n<ows:ExceptionReport xmlns:csw="http://www.opengis.net/cat/csw/2.0.2" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gml="http://www.opengis.net/gml" xmlns:ows="http://www.opengis.net/ows" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2.0" language="en-US" xsi:schemaLocation="http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd"><ows:Exception exceptionCode="NoApplicableCode" locator="service"><ows:ExceptionText>Exception: document not well-formed.\nError: EntityRef: expecting \';\', line 3, column 95 (&lt;string&gt;, line 3).</ows:ExceptionText></ows:Exception></ows:ExceptionReport>'
>
> And My post.xml is formed like this:
>
> <?xml version="1.0" encoding="UTF-8"?>
> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2" xmlns:ogc="http://www.opengis.net/ogc" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:ows="http://www.opengis.net/ows" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gml="http://www.opengis.net/gml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2 http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd" service="CSW" version="2.0.2">
>
>   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map&SERVICE=WMS&VERSION=1.3.0</Source>
>
>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>   <ResourceFormat>application/xml</ResourceFormat>
> </Harvest>
>
> Thank you so much for your help.
>
>
>
>
>
>
>
> El mar., 13 oct. 2020 a las 19:28, Tom Kralidis (<[hidden email]>) escribió:
>>
>> Hi Brian: thanks for the info.  Comments interleaved:
>>
>> On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
>> <[hidden email]> wrote:
>> >
>> > Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>> >
>>
>> What kind of installation problems are you having?
>>
>> > I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>> >
>> > Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>> >
>>
>> You can run a CSW-T Harvest XML POST request with the following XML request:
>>
>> https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml
>>
>> Here, you would replace the <Source> element content with your WMS
>> base URL.  To invoke XML POST requests, see the following
>> FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests
>>
>> Hope this helps.
>>
>> ..Tom
>>
>> > Q: I'm currently using Mapserver 7.7.0-dev in windows.
>> >
>> > Regards.
>> >

_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

bslunab
I have to report a problem but I don't know if this happens because of pyCSW or qgis:

When I use the MetaSearch plugin, appears my layers from WMS, but when I try to load a layer via WMS call, appears this error:

AttributeError: 'NoneType' object has no attribute 'addRasterLayer'

Traceback (most recent call last):
  File "C:/OSGEO4~1/apps/qgis-ltr/./python/plugins\MetaSearch\dialogs\maindialog.py", line 757, in add_to_ows
    ows_provider.addRasterLayer.connect(self.iface.addRasterLayer)
AttributeError: 'NoneType' object has no attribute 'addRasterLayer'


Versión de Python: 3.7.0 (v3.7.0:1bf9cc5093, Jun 27 2018, 04:59:51) [MSC v.1914 64 bit (AMD64)]
Versión de QGIS: 3.10.6-A Coruña A Coruña, ec80021f49

Ruta de Python:

  • C:/OSGEO4~1/apps/qgis-ltr/./python
  • C:/Users/Brian Luna/AppData/Roaming/QGIS/QGIS3\profiles\default/python
  • C:/Users/Brian Luna/AppData/Roaming/QGIS/QGIS3\profiles\default/python/plugins
  • C:/OSGEO4~1/apps/qgis-ltr/./python/plugins
  • C:\OSGEO4~1\apps\Python37
  • C:\OSGEO4~1\apps\Python37\Scripts
  • C:\OSGeo4W64\bin\python37.zip
  • C:\OSGEO4~1\apps\Python37\DLLs
  • C:\OSGEO4~1\apps\Python37\lib
  • C:\OSGeo4W64\bin
  • C:\OSGEO4~1\apps\Python37\lib\site-packages
  • C:\OSGEO4~1\apps\Python37\lib\site-packages\win32
  • C:\OSGEO4~1\apps\Python37\lib\site-packages\win32\lib
  • C:\OSGEO4~1\apps\Python37\lib\site-packages\Pythonwin
  • C:/Users/Brian Luna/AppData/Roaming/QGIS/QGIS3\profiles\default/python
Does anyone know the propertly way to solve it?


El jue., 12 nov. 2020 a las 18:25, BRIAN STIFFENN LUNA BOLIVAR (<[hidden email]>) escribió:
Hi Tom, sorry for the late response, I've been really busy, but I have some really good news:

Last week I applied your recommendation, so I fellow this to configure correctly the harvest:

1. Change my file post.xml and now look like this:

<?xml version="1.0" encoding="UTF-8"?>
<Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
xmlns:ogc="http://www.opengis.net/ogc"
xmlns:gmd="http://www.isotc211.org/2005/gmd"
xmlns:ows="http://www.opengis.net/ows"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:dct="http://purl.org/dc/terms/"
xmlns:gml="http://www.opengis.net/gml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
service="CSW" version="2.0.2">
  <Source>http://127.0.0.1/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
  <ResourceType>http://www.opengis.net/wms</ResourceType>
  <ResourceFormat>application/xml</ResourceFormat>
</Harvest>


2. Run the following code: python bin/pycsw-admin.py -c post_xml -u http://127.0.0.1/pycsw/csw.py -x C:/ms4w/DATA/post.xml

- Harvest works, at the end show:
...</csw:HarvestResponse>'
Done

3. Then execute the following: pycsw-admin.py -c load_records -p /path/to/records -f default.cfg -y

4. Prove the csw in QGIS with MetaSearch and here appear my layers, so it works PERFECTLY! Thank you so much for your help.

Now I have a question: Does pyCSW generate an html document with the layers and information in? If not, how can I do this automatically just with the GetCapabilities response?

Regards,


El mié., 14 oct. 2020 a las 5:54, Tom Kralidis (<[hidden email]>) escribió:
Hi Brian: it looks like the "&" characters in the <Source> element are
causing XML parsing issues.  They are also
not required in the context of a CSW Harvest request.  Can you update
your XML request with just the base URL
in <Source>?  The request parameters are autogenerated by pycsw accordingly:

<?xml version="1.0" encoding="UTF-8"?>
<Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
xmlns:ogc="http://www.opengis.net/ogc"
xmlns:gmd="http://www.isotc211.org/2005/gmd"
xmlns:ows="http://www.opengis.net/ows"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:dct="http://purl.org/dc/terms/"
xmlns:gml="http://www.opengis.net/gml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
service="CSW" version="2.0.2">
  <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
  <ResourceType>http://www.opengis.net/wms</ResourceType>
  <ResourceFormat>application/xml</ResourceFormat>
</Harvest>

Are you able to try again and report back?

Thanks

..Tom

On Tue, Oct 13, 2020 at 10:04 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:
>
> Thanks a lot for your response Tom, so I have a question, should I follow this steps to harvest a wms service:
>
> 1. Modify the following XML request from my WMS service: https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xmlv (I named: post.xml and save it in c:\geiper\post\post.xml)
> 2. Set in my default.cfg transactions=true
> 3. When it's done, I should execute this command line:
>
> python bin/pycsw-admin.py -c post_xml -u http://localhost/pycsw/csw.py -x c:\geiper\post\post.xml
>
> 4. Refresh the harvested records with the following command line:
>
> python bin/pycsw-admin.py  -c refresh_harvested_records -f default.cfg
>
> Those were all the steps I must follow to harvest records from WMS?
>
> If yes, I get the following error:
>
> b'<?xml version="1.0" encoding="UTF-8" standalone="no"?>\n<!-- pycsw 2.4.2 -->\n<ows:ExceptionReport xmlns:csw="http://www.opengis.net/cat/csw/2.0.2" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gml="http://www.opengis.net/gml" xmlns:ows="http://www.opengis.net/ows" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2.0" language="en-US" xsi:schemaLocation="http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd"><ows:Exception exceptionCode="NoApplicableCode" locator="service"><ows:ExceptionText>Exception: document not well-formed.\nError: EntityRef: expecting \';\', line 3, column 95 (&lt;string&gt;, line 3).</ows:ExceptionText></ows:Exception></ows:ExceptionReport>'
>
> And My post.xml is formed like this:
>
> <?xml version="1.0" encoding="UTF-8"?>
> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2" xmlns:ogc="http://www.opengis.net/ogc" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:ows="http://www.opengis.net/ows" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gml="http://www.opengis.net/gml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2 http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd" service="CSW" version="2.0.2">
>
>   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map&SERVICE=WMS&VERSION=1.3.0</Source>
>
>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>   <ResourceFormat>application/xml</ResourceFormat>
> </Harvest>
>
> Thank you so much for your help.
>
>
>
>
>
>
>
> El mar., 13 oct. 2020 a las 19:28, Tom Kralidis (<[hidden email]>) escribió:
>>
>> Hi Brian: thanks for the info.  Comments interleaved:
>>
>> On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
>> <[hidden email]> wrote:
>> >
>> > Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>> >
>>
>> What kind of installation problems are you having?
>>
>> > I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>> >
>> > Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>> >
>>
>> You can run a CSW-T Harvest XML POST request with the following XML request:
>>
>> https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml
>>
>> Here, you would replace the <Source> element content with your WMS
>> base URL.  To invoke XML POST requests, see the following
>> FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests
>>
>> Hope this helps.
>>
>> ..Tom
>>
>> > Q: I'm currently using Mapserver 7.7.0-dev in windows.
>> >
>> > Regards.
>> >

_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

Tom Kralidis
In reply to this post by bslunab
Hi Brian: good to hear.  pycsw does not provide HTML output.  You would have
to write a script or XSLT to transform the XML into HTML.

..Tom

On Thu, Nov 12, 2020 at 6:26 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:

>
> Hi Tom, sorry for the late response, I've been really busy, but I have some really good news:
>
> Last week I applied your recommendation, so I fellow this to configure correctly the harvest:
>
> 1. Change my file post.xml and now look like this:
>
> <?xml version="1.0" encoding="UTF-8"?>
> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
> xmlns:ogc="http://www.opengis.net/ogc"
> xmlns:gmd="http://www.isotc211.org/2005/gmd"
> xmlns:ows="http://www.opengis.net/ows"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> xmlns:dc="http://purl.org/dc/elements/1.1/"
> xmlns:dct="http://purl.org/dc/terms/"
> xmlns:gml="http://www.opengis.net/gml"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
> http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
> service="CSW" version="2.0.2">
>   <Source>http://127.0.0.1/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>   <ResourceFormat>application/xml</ResourceFormat>
> </Harvest>
>
> (I change http://localhost/... to  http://127.0.0.1/)
>
> 2. Run the following code: python bin/pycsw-admin.py -c post_xml -u http://127.0.0.1/pycsw/csw.py -x C:/ms4w/DATA/post.xml
>
> - Harvest works, at the end show:
> ...</csw:HarvestResponse>'
> Done
>
> 3. Then execute the following: pycsw-admin.py -c load_records -p /path/to/records -f default.cfg -y
>
> 4. Prove the csw in QGIS with MetaSearch and here appear my layers, so it works PERFECTLY! Thank you so much for your help.
>
> Now I have a question: Does pyCSW generate an html document with the layers and information in? If not, how can I do this automatically just with the GetCapabilities response?
>
> Regards,
>
>
> El mié., 14 oct. 2020 a las 5:54, Tom Kralidis (<[hidden email]>) escribió:
>>
>> Hi Brian: it looks like the "&" characters in the <Source> element are
>> causing XML parsing issues.  They are also
>> not required in the context of a CSW Harvest request.  Can you update
>> your XML request with just the base URL
>> in <Source>?  The request parameters are autogenerated by pycsw accordingly:
>>
>> <?xml version="1.0" encoding="UTF-8"?>
>> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
>> xmlns:ogc="http://www.opengis.net/ogc"
>> xmlns:gmd="http://www.isotc211.org/2005/gmd"
>> xmlns:ows="http://www.opengis.net/ows"
>> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>> xmlns:dc="http://purl.org/dc/elements/1.1/"
>> xmlns:dct="http://purl.org/dc/terms/"
>> xmlns:gml="http://www.opengis.net/gml"
>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>> xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
>> http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
>> service="CSW" version="2.0.2">
>>   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
>>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>>   <ResourceFormat>application/xml</ResourceFormat>
>> </Harvest>
>>
>> Are you able to try again and report back?
>>
>> Thanks
>>
>> ..Tom
>>
>> On Tue, Oct 13, 2020 at 10:04 PM BRIAN STIFFENN LUNA BOLIVAR
>> <[hidden email]> wrote:
>> >
>> > Thanks a lot for your response Tom, so I have a question, should I follow this steps to harvest a wms service:
>> >
>> > 1. Modify the following XML request from my WMS service: https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xmlv (I named: post.xml and save it in c:\geiper\post\post.xml)
>> > 2. Set in my default.cfg transactions=true
>> > 3. When it's done, I should execute this command line:
>> >
>> > python bin/pycsw-admin.py -c post_xml -u http://localhost/pycsw/csw.py -x c:\geiper\post\post.xml
>> >
>> > 4. Refresh the harvested records with the following command line:
>> >
>> > python bin/pycsw-admin.py  -c refresh_harvested_records -f default.cfg
>> >
>> > Those were all the steps I must follow to harvest records from WMS?
>> >
>> > If yes, I get the following error:
>> >
>> > b'<?xml version="1.0" encoding="UTF-8" standalone="no"?>\n<!-- pycsw 2.4.2 -->\n<ows:ExceptionReport xmlns:csw="http://www.opengis.net/cat/csw/2.0.2" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gml="http://www.opengis.net/gml" xmlns:ows="http://www.opengis.net/ows" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2.0" language="en-US" xsi:schemaLocation="http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd"><ows:Exception exceptionCode="NoApplicableCode" locator="service"><ows:ExceptionText>Exception: document not well-formed.\nError: EntityRef: expecting \';\', line 3, column 95 (&lt;string&gt;, line 3).</ows:ExceptionText></ows:Exception></ows:ExceptionReport>'
>> >
>> > And My post.xml is formed like this:
>> >
>> > <?xml version="1.0" encoding="UTF-8"?>
>> > <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2" xmlns:ogc="http://www.opengis.net/ogc" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:ows="http://www.opengis.net/ows" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gml="http://www.opengis.net/gml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2 http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd" service="CSW" version="2.0.2">
>> >
>> >   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map&SERVICE=WMS&VERSION=1.3.0</Source>
>> >
>> >   <ResourceType>http://www.opengis.net/wms</ResourceType>
>> >   <ResourceFormat>application/xml</ResourceFormat>
>> > </Harvest>
>> >
>> > Thank you so much for your help.
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > El mar., 13 oct. 2020 a las 19:28, Tom Kralidis (<[hidden email]>) escribió:
>> >>
>> >> Hi Brian: thanks for the info.  Comments interleaved:
>> >>
>> >> On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
>> >> <[hidden email]> wrote:
>> >> >
>> >> > Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>> >> >
>> >>
>> >> What kind of installation problems are you having?
>> >>
>> >> > I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>> >> >
>> >> > Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>> >> >
>> >>
>> >> You can run a CSW-T Harvest XML POST request with the following XML request:
>> >>
>> >> https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml
>> >>
>> >> Here, you would replace the <Source> element content with your WMS
>> >> base URL.  To invoke XML POST requests, see the following
>> >> FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests
>> >>
>> >> Hope this helps.
>> >>
>> >> ..Tom
>> >>
>> >> > Q: I'm currently using Mapserver 7.7.0-dev in windows.
>> >> >
>> >> > Regards.
>> >> >
_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

Tom Kralidis
In reply to this post by bslunab
Hi Brian: this is a QGIS issue and better tabled with the QGIS community.

..Tom

On Thu, Nov 12, 2020 at 6:32 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:

>
> I have to report a problem but I don't know if this happens because of pyCSW or qgis:
>
> When I use the MetaSearch plugin, appears my layers from WMS, but when I try to load a layer via WMS call, appears this error:
>
> AttributeError: 'NoneType' object has no attribute 'addRasterLayer'
>
> Traceback (most recent call last):
>   File "C:/OSGEO4~1/apps/qgis-ltr/./python/plugins\MetaSearch\dialogs\maindialog.py", line 757, in add_to_ows
>     ows_provider.addRasterLayer.connect(self.iface.addRasterLayer)
> AttributeError: 'NoneType' object has no attribute 'addRasterLayer'
>
>
> Versión de Python: 3.7.0 (v3.7.0:1bf9cc5093, Jun 27 2018, 04:59:51) [MSC v.1914 64 bit (AMD64)]
> Versión de QGIS: 3.10.6-A Coruña A Coruña, ec80021f49
>
> Ruta de Python:
>
> C:/OSGEO4~1/apps/qgis-ltr/./python
> C:/Users/Brian Luna/AppData/Roaming/QGIS/QGIS3\profiles\default/python
> C:/Users/Brian Luna/AppData/Roaming/QGIS/QGIS3\profiles\default/python/plugins
> C:/OSGEO4~1/apps/qgis-ltr/./python/plugins
> C:\OSGEO4~1\apps\Python37
> C:\OSGEO4~1\apps\Python37\Scripts
> C:\OSGeo4W64\bin\python37.zip
> C:\OSGEO4~1\apps\Python37\DLLs
> C:\OSGEO4~1\apps\Python37\lib
> C:\OSGeo4W64\bin
> C:\OSGEO4~1\apps\Python37\lib\site-packages
> C:\OSGEO4~1\apps\Python37\lib\site-packages\win32
> C:\OSGEO4~1\apps\Python37\lib\site-packages\win32\lib
> C:\OSGEO4~1\apps\Python37\lib\site-packages\Pythonwin
> C:/Users/Brian Luna/AppData/Roaming/QGIS/QGIS3\profiles\default/python
>
> Does anyone know the propertly way to solve it?
>
>
> El jue., 12 nov. 2020 a las 18:25, BRIAN STIFFENN LUNA BOLIVAR (<[hidden email]>) escribió:
>>
>> Hi Tom, sorry for the late response, I've been really busy, but I have some really good news:
>>
>> Last week I applied your recommendation, so I fellow this to configure correctly the harvest:
>>
>> 1. Change my file post.xml and now look like this:
>>
>> <?xml version="1.0" encoding="UTF-8"?>
>> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
>> xmlns:ogc="http://www.opengis.net/ogc"
>> xmlns:gmd="http://www.isotc211.org/2005/gmd"
>> xmlns:ows="http://www.opengis.net/ows"
>> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>> xmlns:dc="http://purl.org/dc/elements/1.1/"
>> xmlns:dct="http://purl.org/dc/terms/"
>> xmlns:gml="http://www.opengis.net/gml"
>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>> xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
>> http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
>> service="CSW" version="2.0.2">
>>   <Source>http://127.0.0.1/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
>>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>>   <ResourceFormat>application/xml</ResourceFormat>
>> </Harvest>
>>
>> (I change http://localhost/... to  http://127.0.0.1/)
>>
>> 2. Run the following code: python bin/pycsw-admin.py -c post_xml -u http://127.0.0.1/pycsw/csw.py -x C:/ms4w/DATA/post.xml
>>
>> - Harvest works, at the end show:
>> ...</csw:HarvestResponse>'
>> Done
>>
>> 3. Then execute the following: pycsw-admin.py -c load_records -p /path/to/records -f default.cfg -y
>>
>> 4. Prove the csw in QGIS with MetaSearch and here appear my layers, so it works PERFECTLY! Thank you so much for your help.
>>
>> Now I have a question: Does pyCSW generate an html document with the layers and information in? If not, how can I do this automatically just with the GetCapabilities response?
>>
>> Regards,
>>
>>
>> El mié., 14 oct. 2020 a las 5:54, Tom Kralidis (<[hidden email]>) escribió:
>>>
>>> Hi Brian: it looks like the "&" characters in the <Source> element are
>>> causing XML parsing issues.  They are also
>>> not required in the context of a CSW Harvest request.  Can you update
>>> your XML request with just the base URL
>>> in <Source>?  The request parameters are autogenerated by pycsw accordingly:
>>>
>>> <?xml version="1.0" encoding="UTF-8"?>
>>> <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2"
>>> xmlns:ogc="http://www.opengis.net/ogc"
>>> xmlns:gmd="http://www.isotc211.org/2005/gmd"
>>> xmlns:ows="http://www.opengis.net/ows"
>>> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>>> xmlns:dc="http://purl.org/dc/elements/1.1/"
>>> xmlns:dct="http://purl.org/dc/terms/"
>>> xmlns:gml="http://www.opengis.net/gml"
>>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>>> xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2
>>> http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd"
>>> service="CSW" version="2.0.2">
>>>   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map</Source>
>>>   <ResourceType>http://www.opengis.net/wms</ResourceType>
>>>   <ResourceFormat>application/xml</ResourceFormat>
>>> </Harvest>
>>>
>>> Are you able to try again and report back?
>>>
>>> Thanks
>>>
>>> ..Tom
>>>
>>> On Tue, Oct 13, 2020 at 10:04 PM BRIAN STIFFENN LUNA BOLIVAR
>>> <[hidden email]> wrote:
>>> >
>>> > Thanks a lot for your response Tom, so I have a question, should I follow this steps to harvest a wms service:
>>> >
>>> > 1. Modify the following XML request from my WMS service: https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xmlv (I named: post.xml and save it in c:\geiper\post\post.xml)
>>> > 2. Set in my default.cfg transactions=true
>>> > 3. When it's done, I should execute this command line:
>>> >
>>> > python bin/pycsw-admin.py -c post_xml -u http://localhost/pycsw/csw.py -x c:\geiper\post\post.xml
>>> >
>>> > 4. Refresh the harvested records with the following command line:
>>> >
>>> > python bin/pycsw-admin.py  -c refresh_harvested_records -f default.cfg
>>> >
>>> > Those were all the steps I must follow to harvest records from WMS?
>>> >
>>> > If yes, I get the following error:
>>> >
>>> > b'<?xml version="1.0" encoding="UTF-8" standalone="no"?>\n<!-- pycsw 2.4.2 -->\n<ows:ExceptionReport xmlns:csw="http://www.opengis.net/cat/csw/2.0.2" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:gml="http://www.opengis.net/gml" xmlns:ows="http://www.opengis.net/ows" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2.0" language="en-US" xsi:schemaLocation="http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd"><ows:Exception exceptionCode="NoApplicableCode" locator="service"><ows:ExceptionText>Exception: document not well-formed.\nError: EntityRef: expecting \';\', line 3, column 95 (&lt;string&gt;, line 3).</ows:ExceptionText></ows:Exception></ows:ExceptionReport>'
>>> >
>>> > And My post.xml is formed like this:
>>> >
>>> > <?xml version="1.0" encoding="UTF-8"?>
>>> > <Harvest xmlns="http://www.opengis.net/cat/csw/2.0.2" xmlns:ogc="http://www.opengis.net/ogc" xmlns:gmd="http://www.isotc211.org/2005/gmd" xmlns:ows="http://www.opengis.net/ows" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:gml="http://www.opengis.net/gml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/cat/csw/2.0.2 http://schemas.opengis.net/csw/2.0.2/CSW-publication.xsd" service="CSW" version="2.0.2">
>>> >
>>> >   <Source>http://localhost/cgi-bin/mapserv.exe?map=C:/ms4w/DATA/geoserviciosgeiper.map&SERVICE=WMS&VERSION=1.3.0</Source>
>>> >
>>> >   <ResourceType>http://www.opengis.net/wms</ResourceType>
>>> >   <ResourceFormat>application/xml</ResourceFormat>
>>> > </Harvest>
>>> >
>>> > Thank you so much for your help.
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > El mar., 13 oct. 2020 a las 19:28, Tom Kralidis (<[hidden email]>) escribió:
>>> >>
>>> >> Hi Brian: thanks for the info.  Comments interleaved:
>>> >>
>>> >> On Tue, Oct 13, 2020 at 4:13 PM BRIAN STIFFENN LUNA BOLIVAR
>>> >> <[hidden email]> wrote:
>>> >> >
>>> >> > Hello everyone, good day. I have been trying for over a month to install and run pycsw, but I have not been fortunate enough to do it properly for my college degree work.
>>> >> >
>>> >>
>>> >> What kind of installation problems are you having?
>>> >>
>>> >> > I currently have a WMS service in place which I need to run Harvest operation and be able to update the GetCapabilities of the CSW however, I have not found the right way to do it.
>>> >> >
>>> >> > Could someone please provide me with a methodological guide to be able to run the Harvest operation to a WMS?
>>> >> >
>>> >>
>>> >> You can run a CSW-T Harvest XML POST request with the following XML request:
>>> >>
>>> >> https://github.com/geopython/pycsw/blob/master/tests/functionaltests/suites/harvesting/post/Harvest-wms-run1.xml
>>> >>
>>> >> Here, you would replace the <Source> element content with your WMS
>>> >> base URL.  To invoke XML POST requests, see the following
>>> >> FAQ item: https://pycsw.org/faq/#how-can-i-make-csw-post-xml-requests
>>> >>
>>> >> Hope this helps.
>>> >>
>>> >> ..Tom
>>> >>
>>> >> > Q: I'm currently using Mapserver 7.7.0-dev in windows.
>>> >> >
>>> >> > Regards.
>>> >> >
_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

epifanio
 Try upgrading to latest stable QGIS.

On Nov 13, 2020, at 12:34 AM, Tom Kralidis <[hidden email]> wrote:

On Thu, Nov 12, 2020 at 6:32 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:

I have to report a problem but I don't know if this happens because of pyCSW or qgis:

When I use the MetaSearch plugin, appears my layers from WMS, but when I try to load a layer via WMS call, appears this error:

AttributeError: 'NoneType' object has no attribute 'addRasterLayer'

Traceback (most recent call last):
 File "C:/OSGEO4~1/apps/qgis-ltr/./python/plugins\MetaSearch\dialogs\maindialog.py", line 757, in add_to_ows
   ows_provider.addRasterLayer.connect(self.iface.addRasterLayer)
AttributeError: 'NoneType' object has no attribute 'addRasterLayer'


_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

bslunab
Ok Tom thanks for your help. And Hi, Massimo, ok I'll try with your recommendation, you mean the 3.10.6 LTR QGIS version?

El jue., 12 nov. 2020 a las 18:41, massimo di stefano (<[hidden email]>) escribió:
 Try upgrading to latest stable QGIS.

On Nov 13, 2020, at 12:34 AM, Tom Kralidis <[hidden email]> wrote:

On Thu, Nov 12, 2020 at 6:32 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:

I have to report a problem but I don't know if this happens because of pyCSW or qgis:

When I use the MetaSearch plugin, appears my layers from WMS, but when I try to load a layer via WMS call, appears this error:

AttributeError: 'NoneType' object has no attribute 'addRasterLayer'

Traceback (most recent call last):
 File "C:/OSGEO4~1/apps/qgis-ltr/./python/plugins\MetaSearch\dialogs\maindialog.py", line 757, in add_to_ows
   ows_provider.addRasterLayer.connect(self.iface.addRasterLayer)
AttributeError: 'NoneType' object has no attribute 'addRasterLayer'


_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel
Reply | Threaded
Open this post in threaded view
|

Re: PyCSW Harvesting.

epifanio
Hi Brian,
Try with QGIS Stable release3.16.0 "Hannover"

On Nov 13, 2020, at 12:45 AM, BRIAN STIFFENN LUNA BOLIVAR <[hidden email]> wrote:

Ok Tom thanks for your help. And Hi, Massimo, ok I'll try with your recommendation, you mean the 3.10.6 LTR QGIS version?

El jue., 12 nov. 2020 a las 18:41, massimo di stefano (<[hidden email]>) escribió:
 Try upgrading to latest stable QGIS.

On Nov 13, 2020, at 12:34 AM, Tom Kralidis <[hidden email]> wrote:

On Thu, Nov 12, 2020 at 6:32 PM BRIAN STIFFENN LUNA BOLIVAR
<[hidden email]> wrote:

I have to report a problem but I don't know if this happens because of pyCSW or qgis:

When I use the MetaSearch plugin, appears my layers from WMS, but when I try to load a layer via WMS call, appears this error:

AttributeError: 'NoneType' object has no attribute 'addRasterLayer'

Traceback (most recent call last):
 File "C:/OSGEO4~1/apps/qgis-ltr/./python/plugins\MetaSearch\dialogs\maindialog.py", line 757, in add_to_ows
   ows_provider.addRasterLayer.connect(self.iface.addRasterLayer)
AttributeError: 'NoneType' object has no attribute 'addRasterLayer'



_______________________________________________
pycsw-devel mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/pycsw-devel