Building gvSIG from SVN repository

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Building gvSIG from SVN repository

Jorge Sanz (Prodevelop)
Hi all,

As I promised last week, I've written a few notes about how to build gvSIG from SVN repository. I think it should be enough to people that has experience developing with gvSIG published workspaces, for new people I recommend to use those ones first.

I want to thank Benjamin Ducke (Oxford Archeology) for his comments, corrections and bug reports ;)

https://correo.prodevelop.es/descarga/gvsig/svn_article.zip

Cheers

**************

Hola a todos,

Tal y como prometí la semana pasada en la lista internacional, he escrito unas notas sobre cómo compilar gvSIG desde el repositorio de código fuente (SVN). Debería ser suficiente para aquellos que ya tengan experiencia desarrollando con los workspaces publicados de gvSIG.

El documento he creído conveniente escribirlo directamente en inglés porque precisamente documentación de desarrollo en este idioma no nos sobra y dado el perfil técnico del documento (y las pantallas que he incluido), no es difícil de seguir.

Saludos
--
Jorge Gaspar Sanz Salinas
Ingeniero en Geodesia y Cartografía
Prodevelop S.L. - Valencia - España
Tlf.:  96.351.06.12 - Fax:   96.351.09.68
jsanz[en]prodevelop[punto]es
http://www.prodevelop.es



_______________________________________________
Gvsig_internacional mailing list
[hidden email]
http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional
Reply | Threaded
Open this post in threaded view
|

Re: Building gvSIG from SVN repository

Jaime Paneque-Galvez
Hi Jorge

Thanks a lot for writing up a few notes on how to build gvSIG from the project´s SVN repository. It is great you can now do so with gvSIG and am sure there will be a few people out there eager to give it a go!

I don´t know, however, if the link you have provided is OK. In my case, I haven´t been able to follow it as have got an error. Have also tried to access the link going directly to the Prodevelop website but have not had any success either... Can you please advice?

Best regards.

Jaime


--- El vie, 3/10/08, Jorge Sanz <[hidden email]> escribió:

> De: Jorge Sanz <[hidden email]>
> Asunto: [Gvsig_english] Building gvSIG from SVN repository
> Para: "Users and Developers mailing list" <[hidden email]>, "Lista de Desarrolladores de gvSIG" <[hidden email]>
> Fecha: viernes, 3 octubre, 2008 12:43
> Hi all,
>
> As I promised last week, I've written a few notes about
> how to build gvSIG from SVN repository. I think it should be
> enough to people that has experience developing with gvSIG
> published workspaces, for new people I recommend to use
> those ones first.
>
> I want to thank Benjamin Ducke (Oxford Archeology) for his
> comments, corrections and bug reports ;)
>
> https://correo.prodevelop.es/descarga/gvsig/svn_article.zip
>
> Cheers
>
> **************
>
> Hola a todos,
>
> Tal y como prometí la semana pasada en la lista
> internacional, he escrito unas notas sobre cómo compilar
> gvSIG desde el repositorio de código fuente (SVN). Debería
> ser suficiente para aquellos que ya tengan experiencia
> desarrollando con los workspaces publicados de gvSIG.
>
> El documento he creído conveniente escribirlo directamente
> en inglés porque precisamente documentación de desarrollo
> en este idioma no nos sobra y dado el perfil técnico del
> documento (y las pantallas que he incluido), no es difícil
> de seguir.
>
> Saludos
> --
> Jorge Gaspar Sanz Salinas
> Ingeniero en Geodesia y Cartografía
> Prodevelop S.L. - Valencia - España
> Tlf.:  96.351.06.12 - Fax:   96.351.09.68
> jsanz[en]prodevelop[punto]es
> http://www.prodevelop.es
>
>
>
> _______________________________________________
> Gvsig_internacional mailing list
> [hidden email]
> http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional


     

_______________________________________________
Gvsig_internacional mailing list
[hidden email]
http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional
Reply | Threaded
Open this post in threaded view
|

RE: Building gvSIG from SVN repository

Jorge Sanz (Prodevelop)
Hi Jaime,

The link is working now on my machine[1], outside Prodevelop headquarters.

Anyway I've also uploaded it to megaupload[2]

Regards
[1] http://www.codinghorror.com/blog/images/works-on-my-machine-stamped.png
[2] http://www.megaupload.com/es/?d=JP4KXHFY

Jorge Gaspar Sanz Salinas
Ingeniero en Geodesia y Cartografía
Prodevelop S.L. - Valencia - España
Tlf.:  96.351.06.12 - Fax:   96.351.09.68
jsanz[en]prodevelop[punto]es
http://www.prodevelop.es 



-----Mensaje original-----
De: [hidden email] en nombre de Jaime Paneque-Galvez
Enviado el: vie 03/10/2008 17:00
Para: Users and Developers mailing list; Lista de Desarrolladores de gvSIG
Asunto: Re: [Gvsig_english] Building gvSIG from SVN repository
 
Hi Jorge

Thanks a lot for writing up a few notes on how to build gvSIG from the project´s SVN repository. It is great you can now do so with gvSIG and am sure there will be a few people out there eager to give it a go!

I don´t know, however, if the link you have provided is OK. In my case, I haven´t been able to follow it as have got an error. Have also tried to access the link going directly to the Prodevelop website but have not had any success either... Can you please advice?

Best regards.

Jaime


--- El vie, 3/10/08, Jorge Sanz <[hidden email]> escribió:

> De: Jorge Sanz <[hidden email]>
> Asunto: [Gvsig_english] Building gvSIG from SVN repository
> Para: "Users and Developers mailing list" <[hidden email]>, "Lista de Desarrolladores de gvSIG" <[hidden email]>
> Fecha: viernes, 3 octubre, 2008 12:43
> Hi all,
>
> As I promised last week, I've written a few notes about
> how to build gvSIG from SVN repository. I think it should be
> enough to people that has experience developing with gvSIG
> published workspaces, for new people I recommend to use
> those ones first.
>
> I want to thank Benjamin Ducke (Oxford Archeology) for his
> comments, corrections and bug reports ;)
>
> https://correo.prodevelop.es/descarga/gvsig/svn_article.zip
>
> Cheers
>
> **************
>
> Hola a todos,
>
> Tal y como prometí la semana pasada en la lista
> internacional, he escrito unas notas sobre cómo compilar
> gvSIG desde el repositorio de código fuente (SVN). Debería
> ser suficiente para aquellos que ya tengan experiencia
> desarrollando con los workspaces publicados de gvSIG.
>
> El documento he creído conveniente escribirlo directamente
> en inglés porque precisamente documentación de desarrollo
> en este idioma no nos sobra y dado el perfil técnico del
> documento (y las pantallas que he incluido), no es difícil
> de seguir.
>
> Saludos
> --
> Jorge Gaspar Sanz Salinas
> Ingeniero en Geodesia y Cartografía
> Prodevelop S.L. - Valencia - España
> Tlf.:  96.351.06.12 - Fax:   96.351.09.68
> jsanz[en]prodevelop[punto]es
> http://www.prodevelop.es
>
>
>
> _______________________________________________
> Gvsig_internacional mailing list
> [hidden email]
> http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional

     

_______________________________________________
Gvsig_internacional mailing list
[hidden email]
http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional


_______________________________________________
Gvsig_internacional mailing list
[hidden email]
http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional

winmail.dat (6K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

RE: Building gvSIG from SVN repository

Jaime Paneque-Galvez
Thanks Jorge, have downloaded it from megaupload and works fine.

Best wishes.

Jaime


--- El vie, 3/10/08, Jorge Sanz <[hidden email]> escribió:

> De: Jorge Sanz <[hidden email]>
> Asunto: RE: [Gvsig_english] Building gvSIG from SVN repository
> Para: [hidden email], "Users and Developers mailing list" <[hidden email]>
> Fecha: viernes, 3 octubre, 2008 6:07
> Hi Jaime,
>
> The link is working now on my machine[1], outside
> Prodevelop headquarters.
>
> Anyway I've also uploaded it to megaupload[2]
>
> Regards
> [1]
> http://www.codinghorror.com/blog/images/works-on-my-machine-stamped.png
> [2] http://www.megaupload.com/es/?d=JP4KXHFY
>
> Jorge Gaspar Sanz Salinas
> Ingeniero en Geodesia y Cartografía
> Prodevelop S.L. - Valencia - España
> Tlf.:  96.351.06.12 - Fax:   96.351.09.68
> jsanz[en]prodevelop[punto]es
> http://www.prodevelop.es 
>
>
>
> -----Mensaje original-----
> De: [hidden email] en nombre
> de Jaime Paneque-Galvez
> Enviado el: vie 03/10/2008 17:00
> Para: Users and Developers mailing list; Lista de
> Desarrolladores de gvSIG
> Asunto: Re: [Gvsig_english] Building gvSIG from SVN
> repository
>  
> Hi Jorge
>
> Thanks a lot for writing up a few notes on how to build
> gvSIG from the project´s SVN repository. It is great you
> can now do so with gvSIG and am sure there will be a few
> people out there eager to give it a go!
>
> I don´t know, however, if the link you have provided is
> OK. In my case, I haven´t been able to follow it as have
> got an error. Have also tried to access the link going
> directly to the Prodevelop website but have not had any
> success either... Can you please advice?
>
> Best regards.
>
> Jaime
>
>
> --- El vie, 3/10/08, Jorge Sanz <[hidden email]>
> escribió:
>
> > De: Jorge Sanz <[hidden email]>
> > Asunto: [Gvsig_english] Building gvSIG from SVN
> repository
> > Para: "Users and Developers mailing list"
> <[hidden email]>, "Lista de
> Desarrolladores de gvSIG"
> <[hidden email]>
> > Fecha: viernes, 3 octubre, 2008 12:43
> > Hi all,
> >
> > As I promised last week, I've written a few notes
> about
> > how to build gvSIG from SVN repository. I think it
> should be
> > enough to people that has experience developing with
> gvSIG
> > published workspaces, for new people I recommend to
> use
> > those ones first.
> >
> > I want to thank Benjamin Ducke (Oxford Archeology) for
> his
> > comments, corrections and bug reports ;)
> >
> >
> https://correo.prodevelop.es/descarga/gvsig/svn_article.zip
> >
> > Cheers
> >
> > **************
> >
> > Hola a todos,
> >
> > Tal y como prometí la semana pasada en la lista
> > internacional, he escrito unas notas sobre cómo
> compilar
> > gvSIG desde el repositorio de código fuente (SVN).
> Debería
> > ser suficiente para aquellos que ya tengan experiencia
> > desarrollando con los workspaces publicados de gvSIG.
> >
> > El documento he creído conveniente escribirlo
> directamente
> > en inglés porque precisamente documentación de
> desarrollo
> > en este idioma no nos sobra y dado el perfil técnico
> del
> > documento (y las pantallas que he incluido), no es
> difícil
> > de seguir.
> >
> > Saludos
> > --
> > Jorge Gaspar Sanz Salinas
> > Ingeniero en Geodesia y Cartografía
> > Prodevelop S.L. - Valencia - España
> > Tlf.:  96.351.06.12 - Fax:   96.351.09.68
> > jsanz[en]prodevelop[punto]es
> > http://www.prodevelop.es
> >
> >
> >
> > _______________________________________________
> > Gvsig_internacional mailing list
> > [hidden email]
> >
> http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional
>
>
>      
>
> _______________________________________________
> Gvsig_internacional mailing list
> [hidden email]
> http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional


     

_______________________________________________
Gvsig_internacional mailing list
[hidden email]
http://runas.cap.gva.es/mailman/listinfo/gvsig_internacional